660 Model - 6 HORSE - Starting at:

Outside Diameter: 61' 4"
Inside Diameter: 46' 4"
 Both inside and outside diameter panels are 72” tall with the
bottom 24” being solid to contain material of choice on ground,
the top 48” is 3X3 wire mesh to prevent injury to Horses.
 This model has 6 arms with approximately 32’ between each arm
at the outer most point.
 The “hot” gates hanging off the Arms are standard- 48”h x 78”w
made of 2x2 wire mesh.
 This 78” hanging gate has a 6” gap on both sides that make a 90”
wide path/track for the horses to travel, which also gives plenty of
room for the horse to turn around during direction change.
 The hanging gate also has the ability to be electrified if needed
with a simple switch on the control panel. This function is also
available with remote control if desired.
 This base unit has no bearings to grease or chains to tighten which
allows the unit to be almost maintenance free.
 This unit is a direct drive unit, it is suggested that the oil level in
the gear box is checked through the sight glass 1-2x/yr. Add oil if
necessary.
 This unit requires 220v single phase on a 20 amp breaker